Top Teng Cigar Cutter Review

Introduction

If you enjoy having a cigar from time to time, you may want to invest in a cigar cutter. Investing in a good quality cigar cutter allows you to properly enjoy the experience of smoking a cigar, a good cigar cutter measures and carefully cuts the right amount from the cigar, thus leaving you with a quality cut.

Factors To Consider Before Purchasing A Cigar Cutter

Before choosing a cigar cutter, there are some factors that are important to consider before purchasing. The first thing to consider is the type of cigar cutter you want, there are two main types of cigar cutters, the first type which is the guillotine cutter is famous among a lot of cigar smokers, but both types have their pros and cons, let discuss them a bit;

Guillotine Cutters: These types of cutters are the traditional cutters that almost every smoker is used to, they usually slide over the cigar’s end. If you are using this type of cigar cutter, you have to be careful so that you do not end up cutting the cigar’s edge too much. There are some models have been made in such a way that they limit the amount of cigar that can be cut off, but most of the time when it comes to this type of cigar cutter, you might end up snipping off more than enough of the cigar’s end.

V-Type Cutters: These types of cutters are designed to make a “V” shaped cut at the cigar’s end. This cutter only cuts out a small part of the cigar; it can only remove a small bit of the cigar.

Scissors Type Cutter: This is another type of cutter, but it isn’t very popular. It was made popular by Xikar MTX. This multi-cutter tool provides you with a clean and powerful cut. A lot of men add it to their everyday accessory, they are easy to add to your keychain, and they can also be used as a nice gift.

Purchasing a good quality cigar cutter requires you to know about cigars and how best to cut them if you get a cheap cutter, it won’t do an excellent job of cutting off the end. Apart from choosing the type of cigar cutter you want, you also have to consider other factors that include;

The Cutter’s Material: The majority of cigar cutters are made from surgical stainless steel. Some other cutters also incorporate some plastic moldings surrounding the steel blades, but it is best to purchase one that is all stainless steel.

The Size Of The Cutter: It is important that your cigar cutter is small enough to fit inside your pocket. You will most likely go outside or move to an empty space to smoke your cigar, and having a cutter handy is vital.

Preferred Type: Personally, the V cutter is my favorite cutter because it removes less of the cigar compared to the guillotine type. The V type of cutter allows you to enjoy your cigar for a bit longer. The reason why V cutters haven’t been so popular is probably because Hollywood makes guillotine cutter look way cooler on tv.

The Gauge: The same way cigars come in different ring gauges is the same way that cigar cutters come in a variety of ring gauges, they usually range from 20 to 60. However, you won’t find a cigar that won’t fit into a standard cigar cutter. But if you enjoy having cigars that have large ring gauges you might want to get a cigar cutter that cuts well.

We have reviewed our top cigar cutter below. Let’s take a look.

Top Teng Cigar Cutter Review

TOP TENG Double Blade Guillotine Cigar Cutter

This cigar cutter is a guillotine type cutter which means it cuts from both sides with a smooth motion. This cutter is constructed from premium brushed stainless steel and has a self-sharpening double blade guillotine. It can cut any cigar that has a 60 ring gauge and up, it comes in a velvet pouch that keeps it safe from damages and also makes it easy to carry about. It comes with a lifetime warranty which is reassuring.

Key Features

  • It is made from brushed stainless steel
  • Self-sharpening blades
  • It has a hole diameter of 0.892 inches
  • Pocket size
  • It comes with a velvet pouch

Specifications

  • Brand: Top Teng
  • Model: Top Teng Guillotine Cigar Cutter
  • Material: Stainless steel

Pros

  • It is constructed from premium stainless steel which makes it durable.
  • It is light and easy to carry about
  • It cuts smoothly
  • It is great as a gift

Cons

  • Some customers have complained about the blade becoming loose

Conclusion

We like this cutter because it has a simple overall design, the premium stainless steel it is made from gives it a nice look. Cutters are essential in order for you to enjoy your cigar, enjoy smoking your cigar with the help of a good-quality cutter.

Also, see; Alaska Bear Stainless Steel Cigar Cutter Review

Leave a Comment